|
Try This
I Installed A Back Up Camera Using The Voyager Vccyl35. I Replaced My Head Unit , But Still Recommend The Camera Using A Monitor. Drilled A 3/4" Hole In License Plate Just Below Frame , Between The F And R Above The O In California. I Couldn't Be Happier With The Result. Didn't Drill Any Holes For Cable Into Cab. On Passenger Side There Are Two Plastic Plugs Near The Door Hinge. This Is A Double Wall So Find Exiting Rubber Goumet That Wires Pass Through Behind Inside Side Panel. Make 1/4" Hole In Plastic Plug And Cut Slit To Put Cable Through. Fish Down To Rubber Goumet Which Already Has A Slit. You Are Now In The Cab. Now You Need To Route To Rear Of Truck. From Plastic Plug You Can Tuck Cable Behind Fender Down To Bottom Of Truck. I Used Tie Wraps And Stick On Holders To Underside Of Body To Rear Of Truck. The Camera Gave Me A Very Wide Veiw, Matter Of Fact It Even Covers Left & Right Blind Spots.
|