|
Bright Chrome Door Edge Molding:
After adding the bright chrome door edge molding to my modified air filter box this weekend, I decided to try adding some of the same stuff to the edges of my doors. Mind you, I've really never been a fan of adding door edge molding, but my supposed 2-car garage is unfortunately short and narrow. With the long doors of the SSR, similar to that on the Corvette, I seem to ocassionally bump the inside wall with the door in spite of trying to be very careful.
Thus I installed a couple of 17-3/4" pieces of the bright chrome door molding, and I really don't think it looks too bad. Certainly not on my color SSR. I'll try it for a while, and it's relatively easily removed if I change my mine about it. Certainly it will help protect the door edges as it is supposed to. The length I mentioned takes it from the bottom edge of the cutout for the door handle to a seam in the body panels, a convenient place to stop the molding I thought.
Alex
|
