ATTN FLORIDA MEMBERS
BMR FABRICATION IN THONOTOSASSA, FL needs an OEM Track Bar/Panhard Rod for Suspension product development. They just want to take measurements. It would be most helpful if 1 auto & 1 manual trans could help out. 10 bolt vs. 14 bolt rear end housing may have different bars?
Check out the SSR goods at
www.bmrfabrication.com and contact Jason for details.
BMR already makes upper and lower control arms & I asked them to make a complimentary piece known as the track bar or panhard bar. This is the 5th link in your rear suspension. It runs cross-wise from the frame to the differential housing & keeps the rear end centered.
You've got the sway bars or are thinking about them? Is your truck lowered? Finish that suspension off with Adjustable Control Arms and an adjustable track bar!
