Quote:
Originally Posted by JimGnitecki
Rear tread (tire centerline to tire centerline) in the 1955 Chevy 3100 model pickup is 61.02 inches.
62" rotor to rotor would probably be close, right? Without cutting and restraightening even . . .
hmmmmmm
Any idea of WEIGHT of the complete assemlby without wheels and tires?
Jim G
|
I did not weight it. it takes two strong guys to carry it. I will give it a SWAG at 300# + or - a few pounds. Its a tough unit but it can be trimed to lessen the weight. One other thing I did not mention, the bolt pattern is 5 on 4 1/4 most fords are 5 on 4 1/2 so you need to change out the hubs or take them to the Machine shop. No one makes a universal wheel lug pattern as of yet too fit both. It's not that much trouble to make them match.
