Quote:
Originally Posted by wildcat66
Yes but When I turn into my drive way or take a corner on two wheels It creaks  Maybe the nuts are loose again!  |
This happened with mine Machell but it wasn't the sway nuts themselves but the joint they hook into ...ICBlue tightened this for me at his shop and I have had no more problems. Don't know what the technical terms are but will find out this weekend and let you know. Mine was more like a 'clunk' going into corners, bumpy roads, driveway.
Quote:
Originally Posted by ICBlue
Just a hint to correct the problem is you need a very thin open end wrench
and to hold the joint from turning. Then box open to tight nut and the final
you insert another box open and use as a lever pry bar. It need to be torqued to at least 65 ft lbs. or heavy umph..! Hint do not use blue lock ez
you will not be able to remove if you have too. Please remember you need a
one leader. We have a group of team leader in every job this helps to eliminate the what happened is isn't working.
Robert Salerno
ICBlue  |
whoops...I see Robert has already popped in and addressed this.
