Include

[Marc NY]

Window Tip-In Adjustment - Door

Adjustment Procedure

1. Position the window fully up.
2. Remove the door trim panel. Refer to Trim Panel Replacement - Door .


3. Remove the water deflector. Refer to Water Deflector Replacement - Front Door .


4. Loosen the jack screw jam nut (1).
5. Adjust tip in with the jack screw (2).
- Important: One turn of the screw equals approximately 1 mm (0.04 in) change at the top of the window.
Turn the jack screw clockwise to tip the window outward.
- Turn the jack screw counterclockwise to tip the window inward.
7. Notice: Refer to Fastener Notice in Cautions and Notices.
8. Tighten the jack screw jam nut (1).
Tighten
Tighten the jack screw jam nut to 5 N•m (44 lb in).
9. Raise the window and inspect the alignment. Repeat the procedure as necessary.


10. Install the water deflector. Refer to Water Deflector Replacement - Front Door .
11. Install the door trim panel. Refer to Trim Panel Replacement - Door .
12. Close the door.
________________________________________

Document ID# 1239715
Chevrolet SSR