Quote:
Originally Posted by UMPIRE13
Jason,
You can check the fluid level of the top tank.
That is all you need to do.
Here is how
Important:
• When servicing the hydraulic system do not allow the fluid level to drop below the minimum indicator line on the reservoir.
• Inspect the hydraulic fluid level with the vehicle parked on a level surface, the folding top in the closed position, and the stowage compartment lid open.
~snip~
Remove the shop towel.
Remove the protective covering.
Close the stowage compartment lid.
Cycle the folding top under power through one complete cycle in both directions.
Ensure that the folding top is in the open position.
Open the stowage compartment lid.
Inspect the fluid level and add fluid as necessary.
Install the folding top pump noise cover onto the pump.
Close the stowage compartment lid.
|
Does that mean the fluid level should be the same with the top up or down, or just between the min/max marks, in both positions?
