Quote:
Originally Posted by 1shabby
how the heck do you release the front chrome bar after removing the screws to replace a signal light bulb? I need help
thanks
|
Try this
Front Bumper Fascia Molding Replacement (Molding Assembly)
Removal Procedure
Open the hood.
Remove the fasteners from the grille brackets.
Use a flat-bladed tool to release the hook and loop from the grille applique molding.
Remove the grille applique molding by pulling toward the front of the vehicle.
Then this how to change the Bulb
Remove the park/turn signal lamp from the vehicle. Refer to Parking and Turn Signal Lamp Replacement .
Remove the electrical connector from the park/turn signal lamp by rotating the connector counterclockwise.
Pull bulb out of electrical connector.
