Quote:
Originally Posted by sz0k30
The seats I am looking to install have power, heat & memory. I am not too concerned about the heat & memory, but I have to have the travel working.
Thanks.
|
If you have a complete seat assembly with the 16 way connector, then all you need to do is supply power to the two orange wires and ground the black wire and then the seats should move, do this two both seats. the seat heaters are going to be more difficultt so if you want them to work I'll have to do some checking as the seats will have to be wired together as the control module for both seats is in the drivers seat.
