My SSR: yellow tub, lowered, k&N filter, Flo Master, Hypertech for 6.o,yellow tuck & roll seats and misc.
Engine Billet Items Please call me; I would like to order complete set and want to verify how to place order with you. Neil Kaiser 541-956-2007 aka geazer
My wife bought me a set of the billet parts for Christmas and they are absolutely great! I can't wait to get them on Yellow! Thanks for a great product!
My wife bought me a set of the billet parts for Christmas and they are absolutely great! I can't wait to get them on Yellow! Thanks for a great product!
Thanks for the kind words "krash59", hope you get extra looks with them!!
Hi,
I have designed a few billet items for our SSR engine areas. Please view the image below which shows all the items installed and PM me for ordering information.
Engine fluid caps $120 (you can see the washer and brake in photo) - Highly polished with SSR logo and ribbed edge. Custom built to fit snugly over the existing engine oil, window washer, radiator overflow, power steering and brake fluid caps. Note that the brake cover is sized similar to the clutch and the stock radiator cap will fit the Magnacharger tank. These additional caps can be ordered individually too. The window washer cap needs the strap and tab trimmed off to fit over the top, very easy mod and the cap is inexpensive and common to many GM cars if you want another one.
Fuse cover $50 (large square part in lower middle of photo) - This high polished plate will fit neatly to all edges of the top of your existing fuse cover. This too is available with the SSR truck outline logo and ribbed lines to compliment the other pieces. Please note that the fuse cover has a slight bend to it and the billet cover is delivered with a similar bend to allow for easy installation. Please make sure you are satisfied with the bend before you apply it, some adjustment might be necessary and can be done by carefully pressing in the desired direction as the aluminum is rather soft. A rolled up soft towel may help to increase or decrease as necessary.
Brake Fluid Reservoir Cover $80 (lower right hand area of photo) - This is my newest item and was the creation of my machinist. I must say this is really an outstanding part. The cover wraps around the entire white reservoir and actually has an edge of about 1 inch that is machined to match the rest of the parts.
Installation: All items attach by using some 3M automotive double sided tape that is used for trim attachment (not included but you can buy at any automotive store) or by another method you choose. Please clean all surfaces well with something like alcohol before adhering with the tape.
Prices include shipping. I am trying to keep a small inventory but these are custom built and orders will normally arrive to you anywhere from 2-4 weeks or so after I receive payment, depending on when your order was placed. The machine shop builds many parts and I have to work my order in with all the others. Also note that I have had no issues to date but if you want insurance or special handling for your shipment please specify and add that amount to your total. In your order, please detail what you want and include your screen name so I can update you on shipping.
The below images are from a test I did for the radiator overflow tank, I have hand made and sold a few of these and plan to get them "mass produced" soon, stay tuned........
Please keep us on the list for the radiator tank cover is finsihed, arizdare@yahoo.com, thanks, Mark
my e mail is louispetrone@comcast.net I would like to know the cost of the altinator and how do i order some of the billet parts Thanks Lou petrone ( pepperoni )
hi this is bud-lin would like to order engine fluid caps here are phone no 561964-1876 or email me what to do thanks
I have designed a few billet items for our SSR engine areas. Please view the image below which shows all the items installed and PM me for ordering information.
Engine fluid caps $120 (you can see the washer and brake in photo) - Highly polished with SSR logo and ribbed edge. Custom built to fit snugly over the existing engine oil, window washer, radiator overflow, power steering and brake fluid caps. Note that the brake cover is sized similar to the clutch and the stock radiator cap will fit the Magnacharger tank. These additional caps can be ordered individually too. The window washer cap needs the strap and tab trimmed off to fit over the top, very easy mod and the cap is inexpensive and common to many GM cars if you want another one.
Fuse cover $50 (large square part in lower middle of photo) - This high polished plate will fit neatly to all edges of the top of your existing fuse cover. This too is available with the SSR truck outline logo and ribbed lines to compliment the other pieces. Please note that the fuse cover has a slight bend to it and the billet cover is delivered with a similar bend to allow for easy installation. Please make sure you are satisfied with the bend before you apply it, some adjustment might be necessary and can be done by carefully pressing in the desired direction as the aluminum is rather soft. A rolled up soft towel may help to increase or decrease as necessary.
Brake Fluid Reservoir Cover $80 (lower right hand area of photo) - This is my newest item and was the creation of my machinist. I must say this is really an outstanding part. The cover wraps around the entire white reservoir and actually has an edge of about 1 inch that is machined to match the rest of the parts.
Installation: All items attach by using some 3M automotive double sided tape that is used for trim attachment (not included but you can buy at any automotive store) or by another method you choose. Please clean all surfaces well with something like alcohol before adhering with the tape.
Prices include shipping. I am trying to keep a small inventory but these are custom built and orders will normally arrive to you anywhere from 2-4 weeks or so after I receive payment, depending on when your order was placed. The machine shop builds many parts and I have to work my order in with all the others. Also note that I have had no issues to date but if you want insurance or special handling for your shipment please specify and add that amount to your total. In your order, please detail what you want and include your screen name so I can update you on shipping.
The below images are from a test I did for the radiator overflow tank, I have hand made and sold a few of these and plan to get them "mass produced" soon, stay tuned........[/quote]
has anybody heard from mike.i have pm'ed him and left message here.i am wanting to get caps and fuse cover.does anyone know how to contact him besides here?thanks.sonny.
Mike, I have all the covers and caps, Love the look - Classy. And need a recommendation on polishing - which product do you like? When is the radiator cover available? PM me when and I will add that to the engine compartment.
Hi...Just back from Laughlin met some wonderful people, saw some of the finest trucks, and best of all had a "great" time! I saw your fluid cover caps on several trucks and I'm ready to order! Please invoice me from my Pay Pal account to byamron@aol.com for the caps and a brake fluid cover!!
Just received and installed my caps tonight!...I realized after an installation of a couple of caps........ that each cap belongs to a different plastic cap.....I hope that is a "heads up" for everyone in the future... These are probably some of the finest quality pieces I have ever seen ! Let me know when you have some more items....
Just received and installed my caps tonight!...I realized after an installation of a couple of caps........ that each cap belongs to a different plastic cap.....I hope that is a "heads up" for everyone in the future... These are probably some of the finest quality pieces I have ever seen ! Let me know when you have some more items....
billet items for our SSR engine areas. Please view the image below which shows all the items installed and PM me for ordering information.
Please keep us on the list for the radiator tank cover is finsihed, 
my e mail is 
