Nascar Chin Spoiler for $200 - Page 6

doogie48084 · 10-20-2006, 09:13 AM

just wondered if you got any new pics, Eric?

Stretch · 10-21-2006, 08:56 AM

Let's not forget!!!!!

Tan Man · 10-22-2006, 07:06 AM

Is this the $200.00 dollar chin spoiler or a new version??
http://cgi.ebay.com/ebaymotors/NEW-S...37223426QQrdZ1

cruzned · 10-22-2006, 07:30 AM

Those pics are of the Axiom chin spoiler. I used to have one until Huricane Ernesto took mine away

Chick · 10-26-2006, 05:26 PM

Quote:

Originally Posted by eric-mpd

What we are looking at doing is a thermovacuum forming process out of ABS plastic. This will keep production costs low. If I am not satisfied with the way that turns out we will hand lay them. Either way the first 20 that committed to this will get theirs for the 200.00. I would like to see everyone get them for that price however since we are not in production I cannot pinpoint a final price. I am also planning on doing a shroud for the lower core support to support the lower lip of the spoiler and duct the air to the radiator. This may add some to the price but will be well worth it in terms of making the spoiler rigid and aiding the cooling system.

Hi Eric:
I like the idea of the shroud on the lower lip that will connect to the mount currently utilized to secure the air dam. I agree that it will be worth the extra money integrating the Chin Spoiler into the design and eliminating the requirement of the small spoiler hanging down under the SSR.
I hope the ABS solution works out - This will be one heck of an addition to our machines. Do you have a revised time-table on this project ?
Regards, Chick

CQQL_SSR · 10-26-2006, 10:34 PM

Hi Eric,
You mentioned in a previous post that ther was a list of the first 20 to get the $ 200.00 Chin Spoiler. How do we know if we are on the list. I did recieve an e-mail from you after I posted but do not know where I stand. Can you post the list for us?

I just went back and checked the post I had and it was on page 3 so I guess the list would have to go to about 100 for me to be on it.

Thank you,
Charlie

cliff · 10-31-2006, 06:18 PM

Hi everyone,
I was down in Indiana to visit Eric and check on my ssr and got to see what Eric had done with the spoiler so far. I think it is going to be a nice piece and I like what he has done with it so far. If he is able to produce them the way he hopes and they come out the way he is expecting I think he will sell a lot of them. Can't wait to see the finished product.
I can tell you that Eric is a very detail oriented person and it shows in his workmanship. Thanks again for your help and patience Eric and family.

Beach potato · 11-01-2006, 12:53 PM

Thanks for that update - I have the chin spoiler and the rear spoiler picked out since 8/15 and I needed some word on this stuff, I owe you a beer Cliff

Now I can wait a little longer as I know we will have the best available products because of the professionalism of Eric Peters. Hope there's no problems as my e-mail to Eric has gone unanswered??

Pasta Mike · 11-01-2006, 10:40 PM

I Also Want One Too........................looks Good

Doug Allen · 11-15-2006, 11:04 PM

Quote:

Originally Posted by Beach potato

Thanks for that update - I have the chin spoiler and the rear spoiler picked out since 8/15 and I needed some word on this stuff, I owe you a beer Cliff

Now I can wait a little longer as I know we will have the best available products because of the professionalism of Eric Peters. Hope there's no problems as my e-mail to Eric has gone unanswered??

You can always call Eric - he'll be glad to talk to you.

bodyworkerpro · 11-15-2006, 11:47 PM

Got to have it! The pic from Mike of the yellow SSR with the chin spoiler is hot! I can hardly wait! I'll probably want to do the chin and rear spoiler at the same time, I think...

Ken

SSR6SPD · 11-19-2006, 11:10 AM

THANKS AGAIN ERIC IT WAS GREAT TO TALK TO YOU ON THE PHONE AND PLACE MY ORDER...NOW I CAN'T WAIT TO GET THE PARTS ...BUT THE SSR IS IN THE GARAGE FOR 5 MONTHS SO I GUESS I'LL HAVE TO WAIT THANKS AGAIN...HEY SSR FANATIC MEMBERS ERIC IS AWESOME...THE SPOILER IS MORE THAN $200 BECAUSE ERIC ADDED AIR VENTS AND SCREENS...

BARRY NOLAN · 11-19-2006, 06:03 PM

GOTTA HAVE ONE AS WELL !!!!!!!!!!!!!!!!!!

BARRY

cruzned · 11-19-2006, 06:31 PM

Is the chin spoiler actually ready for order now?

Flassh · 11-19-2006, 07:10 PM

I'm also waiting to hear that we can order the spoiler - I think I'm one of the early ones, but haven't had any confirmation.

Doug Allen · 11-19-2006, 09:01 PM

I paid for mine in September, so I'd say, yes you can order one.

Give Eric a call - he's an interesting guy to talk to, and he's full of ideas.....

SSR6SPD · 01-09-2007, 06:48 PM

Quote:

Originally Posted by SSR6SPD

THANKS AGAIN ERIC IT WAS GREAT TO TALK TO YOU ON THE PHONE AND PLACE MY ORDER...NOW I CAN'T WAIT TO GET THE PARTS ...BUT THE SSR IS IN THE GARAGE FOR 5 MONTHS SO I GUESS I'LL HAVE TO WAIT THANKS AGAIN...HEY SSR FANATIC MEMBERS ERIC IS AWESOME...THE SPOILER IS MORE THAN $200 BECAUSE ERIC ADDED AIR VENTS AND SCREENS...

I SENT ERIC MY MONEY FOR THE CHIN SPOILER.(I AM WAITING VERY PATIENTLY )..ERIC IS A VERY NICE GUY,IT'S ALWAYS A PLEASURE TALKING TO HIM HE HAS ALOT OF KNOWLEDGE AND KNOW HOW.I PERSONALLY LIKE HIS IDEAS AND HIS PRODUCTS ARE ALWAYS TOP NOTCH AND FIT GREAT....THANK YOU ERIC

waysouth6speed · 01-10-2007, 09:10 AM

Quote:

Originally Posted by SSR6SPD

..ERIC IS A VERY NICE GUY,IT'S ALWAYS A PLEASURE TALKING TO HIM HE HAS ALOT OF KNOWLEDGE AND KNOW HOW.I PERSONALLY LIKE HIS IDEAS AND HIS PRODUCTS ARE ALWAYS TOP NOTCH AND FIT GREAT....THANK YOU ERIC

Eric is very nice. I've been on the list since it's inception and although I sent no money, I know Eric hasn't forgotten me. I'm just trying to convince him to deliver it to Florida so he can thaw out and I won't have to pay for shipping!

Gary G · 01-24-2007, 02:48 PM

I talked with Eric form MPD a few moments ago & he says that they are not too far off from real production of the "Nascar Type Spoiler".

Photos of the first real spoiler should be posted in two weeks. Production will follow that week or very soon after.

So...within two to four weeks, we will actually see these spoilers being shipped out.
Looks like the ABS plastic ( though what grade is still to be determined) will be used also.

jwthomp · 01-25-2007, 01:02 PM

Great news! I'm looking forward to this addition to my SSR...

SSR6SPD · 01-27-2007, 06:40 AM

Quote:

Originally Posted by SSR6SPD

I SENT ERIC MY MONEY FOR THE CHIN SPOILER.(I AM WAITING VERY PATIENTLY )..ERIC IS A VERY NICE GUY,IT'S ALWAYS A PLEASURE TALKING TO HIM HE HAS ALOT OF KNOWLEDGE AND KNOW HOW.I PERSONALLY LIKE HIS IDEAS AND HIS PRODUCTS ARE ALWAYS TOP NOTCH AND FIT GREAT....THANK YOU ERIC

I SPOKE WITH ERIC AND HE SAID THE PEOPLE WHO PAID FIRST THERE SPOILERS WILL SHIP FIRST. SO IF YOU DIDN'T PAY YET I WOULD GET IN TOUCH WITH ERIC AND SEND IN YOUR PAYMENT NOW....I CAN'T WAIT TO GET MINE...SHOULD LOOK VERY NICE.. THANK YOU ERIC......