WTB Storage Container 3 bolt rail attachment piece

[mjross]

I'm looking to purchase the 3 bolt rail that slides into the bed rail that holds the plastic storage containers in place. I'm also looking for the 3 hold down nuts. I only need one but if I have to buy 2 I will. If you have one of these rails and would like to sell it please email me at:

mjross50@msn.com

Thank you for your time.

Cheers,

Mj

[snomuncher]

If you can't find a set of the rails, here's an alternate solution.

SSR Hard Saddle Storage Boxes- No Hardware? No Problem

[DreamAsphalt]

Originally Posted by mjross

I'm looking to purchase the 3 bolt rail that slides into the bed rail that holds the plastic storage containers in place. I'm also looking for the 3 hold down nuts. I only need one but if I have to buy 2 I will. If you have one of these rails and would like to sell it please email me at:

mjross50@msn.com

Thank you for your time.

Cheers,

Mj

This is what I did to replace one that was missing...went to lowes in the metal strip section. Bought a strip of aluminum the width of the floor rail..(one of them fits perfectly. Drilled where the hole should go when the bottom of the box is placed on the track..3 wing nuts and large washers...Drilled through the aluminum strips and placed 3 bolts to attach to the wing nuts..and you will have the same as the original except in aluminum....I put some velcro strips on the underside of the aluminum strip to hold to the carpet and file some of the cap...If you have question on my install please PM me...good luck..steve

[mjross]

Thanks guys! DreamAsphalt, I'm the person that bought your bags/containers. I do not doubt that your fix will work fine. However, I would like to acquire the original part if possible.

Cheers,

Mj

[DreamAsphalt]

Originally Posted by mjross

Thanks guys! DreamAsphalt, I'm the person that bought your bags/containers. I do not doubt that your fix will work fine. However, I would like to acquire the original part if possible.

Cheers,

Mj

I didn't look at who was asking the questions till after I hit the reply button....sorry...steve

[SmoovC]

Originally Posted by mjross

I'm looking to purchase the 3 bolt rail that slides into the bed rail that holds the plastic storage containers in place. I'm also looking for the 3 hold down nuts. I only need one but if I have to buy 2 I will. If you have one of these rails and would like to sell it please email me at:

mjross50@msn.com

Thank you for your time.

Cheers,

Mj

Email sent; I have 2 rails with all hold down bolts.

[BlackSSR03]

I have a set of hard boxes and the hardware that I want to sell, pick up only in the Florida West Palm area.
Anyone interested please e mail me and I will let them go for 200.00 cash.
Thanks
Sandy

[mjross]

BlackSSR03,

Thanks for taking the time to respond! However, I did purchase a pair from another forum member. Thanks for your time.

Mj