Texas Rally-Hood & Deck Lid Support Installs

Support Tech · 04-13-2009, 01:27 AM

SSR Fanatics,
Lift Support Technologies, AKA Support Tech's Products will be available at the Texas Rally.
Installation will be included at the Texas Event.
2003-2004 Hood Support Support Kits. (Discard that Prop Rod).
Black Carbon Steel Hood Support Kits $185.00.
Polished Stainless Steel Hood Support Kits $325.00
2005-2006. Replacement Hood Supports - Black $120.00 pair
2005-2006. Replacement Hood Supports, Polished Stainless Steel. $210.00 pair
Press the key fob and you do not have to put your fingers under the deck lid to assist the opening proceedure.
2003-2006. Deck Lid Supports - Black $120.00. pair
2003-2006 Polished Stainless Steel - $185.00. pair
The Deck Lid Supports are available also in the following formats.
Original Height, and the New Extended 3 Inch Height.
The original Factory height from the top of the End Gate to the edge of the Deck Lid is 19 Inches. The new opening height is 22 inches with my New Style Supports. This also gives you better side access to the Cargo Area.
If you have had your Deck Lid Hinges replaced at the GM Dealer, I do have these Supports available also in the 3 inch Deck Lid Height Increase.
Please reply by to this thread or by PM with your requirements so I can prepare to have an adequate supply on hand in Texas.
Looking forward to the 2,232 Mile Drive to Texas.
Stephen Fenner

BlueStreak · 04-13-2009, 06:22 AM

Quote:

Originally Posted by Support Tech

SSR Fanatics,
Lift Support Technologies, AKA Support Tech's Products will be available at the Texas Rally.

Press the key fob and you do not have to put your fingers under the deck lid to assist the opening proceedure.
2003-2006. Deck Lid Supports - Black $120.00. pair
2003-2006 Polished Stainless Steel - $185.00. pair
The Deck Lid Supports are available also in the following formats.
Original Height, and the New Extended 3 Inch Height.
The original Factory height from the top of the End Gate to the edge of the Deck Lid is 19 Inches. The new opening height is 22 inches with my New Style Supports. This also gives you better side access to the Cargo Area.

Looking forward to the 2,232 Mile Drive to Texas.
Stephen Fenner

I have these on my

and love them. I am 6' 1" and it is nice to not bump my head when getting into the front of the bed to reach things.

This is one of the nicest vendors I have met. Not to take anything away from the others I have met, of course. Looking forward to seeing you again Steve.

MICKEYS · 04-13-2009, 09:07 AM

Steve Debbie needs a set of black hood struts for her '04. Looking forward to hangin around the pool havin a few cool ones

Phoenix · 04-13-2009, 11:46 AM

Steve--
I want a set of the deck struts in polished stainless steel in the new
extended height for the Phoenix.
Thanks for doing this.

Blue 06 · 04-13-2009, 09:37 PM

Blue 06 needs extended stainless struts for deck lid.

Thanks

SSRRose · 04-28-2009, 11:49 AM

I would like a set of Black Carbon Steel Hood Supports for a 2004.

Thanks
Joan

Support Tech · 04-28-2009, 10:09 PM

Quote:

Originally Posted by SSRRose

I would like a set of Black Carbon Steel Hood Supports for a 2004.

Thanks
Joan

Joan,
Thanks you, I will add you to the list of Kits to bring to Texas. I will also install them for you. It takes me about 15 minutes to complete the Hood Support Kit install.
Stephen

Support Tech · 05-15-2009, 06:25 AM

Fanatics,
I have prepared a list for the Texas meeting, of people who have responded requesting these products. Thank you.
However, in order to have some correct extra stock on hand to accomodate any further requests, please send me a reply stating what you require for your SSR. I will respond with a prompt reply.
Stephen & Kim Fenner - aka - Support Tech.

BYERS · 05-24-2009, 03:59 PM

Stephen, I am going to bring 6 sets of the new hinges and I want you to bring your extended struts that fit the new hinges. One set of struts for me....OK

Struts part # 15835797
Left hinge # 15835795
Right hinge # 15835796

Warranty Deck Lid Hinge And Strut Replacement.

BYERS · 05-25-2009, 09:28 AM

HINGES

Quote:

Originally Posted by BYERS

Stephen, I am going to bring 6 sets of the new hinges and I want you to bring your extended struts that fit the new hinges. One set of struts for me....OK

Struts part # 15835797 $45.00 each
Left hinge # 15835795 $75.00
Right hinge # 15835796 $75.00

total $195.00

Warranty Deck Lid Hinge And Strut Replacement.

1. ABLUR05
2. MICKEYS
3. RUN ROD RUN
4.
5.
6.

BYERS · 05-25-2009, 09:00 PM

Stephen has the new hinges on his SSR.

BYERS · 05-28-2009, 06:46 AM

Bump

Support Tech · 06-07-2009, 10:09 PM

Quote:

Originally Posted by BYERS

Bump

Fanatics,
For all 2003 - 2006 SSR's.
So far 15 SSR Fanatics have ordered products from me to bring to the Texas Event. In order to not be short of product, (Both HOOD & DECK SUPPORTS) at Kerrville please send a PM with your requirements.
It is only 11 Days until I leave here. I will be bringing extra Stock as I did in Maggie Valley 2008, but you can order ahead to be sure I will have the product you require. BLACK or POLISHED STAINLESS.

Regards,
Stephen & Kim Fenner AKA SUPPORT TECH

HarleyGuy · 06-07-2009, 11:55 PM

deleted

BYERS · 06-10-2009, 08:35 PM

bump

RUN ROD RUN · 06-13-2009, 04:03 PM

Quote:

Originally Posted by BYERS

HINGES

1. ABLUR05
2. MICKEYS
3.
4.
5.
6.

You have a PM Mike.

BYERS · 06-14-2009, 03:42 PM

Quote:

Originally Posted by BYERS

HINGES

1. ABLUR05
2. MICKEYS
3. RUN ROD RUN
4.
5.
6.