Tools needed for "MAXI" Session in TX

[COORS2U]

My husband was lookin at the forum last night and was wondering if you guys could put a tool list together for what you'll need to do the tech session.

IF there is room we can probably handle the following things.

Tools:
Small Jack
Jack Stands
3/8" Cordless Snap-On Impact
1/2" Cordless Snap-On Impact
1/2" Electric Impact
Cordless Snap-On Drill
Cordless Snap-On Light
Extension Cords
Screw Drivers
Trim Panel Tools
1/4" Metric socket set
3/8" Metric socket set
Some 1/2" impact sockets. (I'd like to know what size the lug nuts are to take the wheels on and off)

Let me know!

~Raymie~

[RUN ROD RUN]

Wouldn't hurt to add a bottle opener as that will be put to good use with the high Texas humidity & heat.

[Scott 0168]

Originally Posted by COORS2U

My husband was lookin at the forum last night and was wondering if you guys could put a tool list together for what you'll need to do the tech session.

IF there is room we can probably handle the following things.

Tools:
Small Jack
Jack Stands
3/8" Cordless Snap-On Impact
1/2" Cordless Snap-On Impact
1/2" Electric Impact
Cordless Snap-On Drill
Cordless Snap-On Light
Extension Cords
Screw Drivers
Trim Panel Tools
1/4" Metric socket set
3/8" Metric socket set
Some 1/2" impact sockets. (I'd like to know what size the lug nuts are to take the wheels on and off)

Let me know!

~Raymie~

I was told the lug nuts take a 3/4 inch socket.

[Doug Allen]

I'm bringing FOUR complete sets of tools required to R & R the mirrors and install the FatMat:

Box cutters
Nut Drivers
3/8" drive ratchets, extensions and 10mm sockets
Wire cutters and strippers
Screwdrivers
Pliers
Rollers
Highly Technical Wire Guide and Pulling Tools (coat hangers)

There's not much else needed to install mirrors, FatMat or to swap out chrome pieces like door handles, etc.

[river_rat]

Originally Posted by Scott 0168

I was told the lug nuts take a 3/4 inch socket.

I believe they are actually 19 mm, but that is .748 in brit units so 3/4 should be awful darn close. I'll have a four way in my truck as well.

[DANDYSSR]

Just a reminder, do we need scissors for the mole skin jobs?

[RUN ROD RUN]

Just a reminder, do we need scissors for the mole skin jobs?

When out hunting for mole skin ... which would you take?
a. scissors
b. Box cutters
c. gun
d. all of above
e. other


I know .... lighting up RRR ...

[Doug Allen]

Originally Posted by DANDYSSR

Just a reminder, do we need scissors for the mole skin jobs?

Got 'em.

[OLBSSRD]

Scissors? I'm bringin' Band-Aids and iodine!!

[Cash]

[QUOTE=COORS2U;666289(I'd like to know what size the lug nuts are to take the wheels on and off)

Let me know!

~Raymie~
[/QUOTE]

Originally Posted by Scott 0168

I was told the lug nuts take a 3/4 inch socket.

Yes 3/4" or 19 mm more precisely.

[wildcat66]

bottle opener attached to cooler covered

[COORS2U]

Originally Posted by wildcat66

bottle opener attached to cooler covered

Ditto!!! Got 3 bottle openers on our cooler!

[REBEL]

One lead hammer ...EH knock it off Reb!