Tech Session-March 14th

Thumper · 02-23-2009, 07:50 PM

There is a need for a tech session!!
It will be at our office:
5959 N. 55th Avenue, Glendale
Time: Early! Before it gets to hot
If you would like to come out and help, or if you need help to improve your "R" please let me know! When I get idea of how many will be there, we thought about having a bar b que to feed the group. I'll figure that out later on. For the co-pilots...there is a park-n-swap just across the street if they feel the need to shop! I'll update this as time gets closer with the finer details

Needing some personal attention:
Smokey-tranny pan
Delma Lou- Mike's fan, springs(?)
Dandy SSr-radiator, mirrors, fatmat
Ken & Shirley- Black struts
C1TRob-fatmat
Betty & Fuji-mirrors, fatmat, tips to go
ezmoney-fatmat, muth mirrors,mole skin
azjowett-fatmat, moleskin
azssr04-moleskin, fatmat, maybe Doophus will help with the floormats(haha), fan adjustment
Doophus-muth mirrors
Roadtrp42-muth mirrors
clutch05x2-fatmat

Willing to do the deed:
Doug Allen
MikeinAZ
C1TRob
Rad-SSR
Bigwave
ZsSSR
SSRJim

ZL-SSR-will be furnishing hamburgers and chips! coffee & treats
Dandyssr-dooonuuts!
azssr04-Nathan's, diet coke, and beer!
oldbssrd is just a gawking

Doug Allen · 02-23-2009, 08:12 PM

Thumper and I will be hosting the tech session at our equipment yard....

We have a lift, air, and all the requisite amenities to do installation of things like....

Muth Mirrors - if you want a set installed, contact Mikey to order a set - I'll throw in an installation of FatMat for the doors for each set of mirrors we install - you won't believe the difference in sound quality.

If you have a set of lowering springs, or want a set installed, order them now.....we'll do it.

We'll install radiators, fans, whatever, just let us know SOON, and we'll make sure we can get it done for you.

We'll have barbeque with plenty of food, and if anyone want to pitch in, go for it.

Come on out, we'll have a great time.....we'll be there at 7 AM until we're all tuckered out............

The location will be our office:

Gunsight Construction Companies
5959 N 55th Avenue, Glendale , AZ 85301

Please let us know ASAP if you will attend and what you need done....

Volunteers for installations are very welcome

Doug Allen · 02-23-2009, 08:13 PM

By the way, this is what the "clique" does for others............

LTs SSR · 02-23-2009, 09:52 PM

Glendale, CA????

hdflstf · 02-23-2009, 09:54 PM

Quote:

Originally Posted by LTs SSR

Glendale, CA????

Somehow, I doubt it.

smokey · 02-23-2009, 09:55 PM

Well you better (clique) us in to be there. Have a tranny pan to put on.

Doug Allen · 02-23-2009, 09:57 PM

We need Sandy and Wayne to bring the rum.......we'll supply the Jimmy Buffett sounds....

LTs SSR · 02-23-2009, 09:58 PM

Quote:

Originally Posted by LTs SSR

Glendale, CA????

Quote:

Originally Posted by hdflstf

Somehow, I doubt it.

Well... they didn't specify!!

A girl can hope

Doug Allen · 02-23-2009, 10:02 PM

Lt it is just a short drive

We would be thrilled to have ya!

turnheadz · 02-23-2009, 10:02 PM

Quote:

Originally Posted by Doug Allen

Thumper and I will be hosting the tech session at our equipment yard....

We have a lift, air, and all the requisite amenities to do installation of things like....

Muth Mirrors - if you want a set installed, contact Mikey to order a set - I'll throw in an installation of FatMat for the doors for each set of mirrors we install - you won't believe the difference in sound quality.

If you have a set of lowering springs, or want a set installed, order them now.....we'll do it.

We'll install radiators, fans, whatever, just let us know SOON, and we'll make sure we can get it done for you.

We'll have barbeque with plenty of food, and if anyone want to pitch in, go for it.

Come on out, we'll have a great time.....we'll be there at 7 AM until we're all tuckered out............

The location will be our office:

Gunsight Construction Companies
5959 N 55th Avenue, Glendale , AZ 85301

Please let us know ASAP if you will attend and what you need done....

Volunteers for installations are very welcome

and if that's not enough, the toilet paper there is the absolute softest, plushest TP you'll ever use

wish we could make it but.......there's that distance thing

and work is super busy at that time. And in times like these I don't complain about having to work

LTs SSR · 02-23-2009, 10:04 PM

Quote:

Originally Posted by Doug Allen

Lt it is just a short drive

We would be thrilled to have ya!

Define short drive???

Doug Allen · 02-23-2009, 10:05 PM

Quote:

Originally Posted by LTs SSR

Well... they didn't specify!!

A girl can hope

Glendale AZ LT..........come on over, I'll buy lunch

turnheadz · 02-23-2009, 10:06 PM

Quote:

Originally Posted by LTs SSR

Define short drive???

12 hours, give 'er take

Mike in AZ · 02-23-2009, 10:33 PM

I'll show up to turn a wrench or two. What time are you serving breakfast????

Doug Allen · 02-23-2009, 10:36 PM

Quote:

Originally Posted by Mike in AZ

I'll show up to turn a wrench or two. What time are you serving breakfast????

I was planning on you bringing breakfast.......7 AM is good....

Doug Allen · 02-23-2009, 10:40 PM

...

Mike in AZ · 02-23-2009, 10:41 PM

Quote:

Originally Posted by Doug Allen

I was planning on you bringing breakfast.......7 AM is good....

OK, I'll be there at 7. I may be alone on this one.....

I'll let your Deb talk to mine......

Doug Allen · 02-23-2009, 10:42 PM

Quote:

Originally Posted by Mike in AZ

OK, I'll be there at 7. I may be alone on this one.....

I'll let your Deb talk to mine......

The "Cruise Director" is on it........

TommyB · 02-23-2009, 11:00 PM

Quote:

Originally Posted by LTs SSR

Define short drive???

About a 5 hour drive,or 4 hours if you drive "Linda style"

Delma Lou · 02-24-2009, 04:09 AM

Bill and I have been talking to Mike about his fans since Laughlin so March 14th sounds like the time to do it.

Bill and I like the look of the lowering springs does anyone have an extra set they want to sell or know of a good deal?

Quote:

For the co-pilots...there is a park-n-swap just across the street if they feel the need to shop!

One of my favorite places. I know where I will be.

Delma Lou

AC Rob · 02-24-2009, 05:53 AM

Count me in.

DANDYSSR · 02-24-2009, 07:05 AM

Willing to trade work for donuts, I'll bring the donuts

BlueStreak · 02-24-2009, 07:09 AM

I have a previous engagement that day, but I will be looking for a spare tire kit and help with installation before April 27. Mike, I sure hope we can work that out.

RAD-SSR · 02-24-2009, 08:32 AM

Doug will be there, glad to help. Only stopper is work, hope to be off.

Larry and Nancy

Bone Collector · 02-24-2009, 11:00 AM

Would have loved to come, but we will be in CA that weekend - really hate to miss it. Catch you the next time. Gene

Thumper · 02-24-2009, 11:41 AM

Quote:

Originally Posted by DANDYSSR

Willing to trade work for donuts, I'll bring the donuts

what kind of work do you want done?

DOOPHUS · 02-24-2009, 12:15 PM

Quote:

Originally Posted by Thumper

what kind of work do you want done?

Are "Lookie Lou's" allowed?

! ! ! ! ! !

Thumper · 02-24-2009, 01:16 PM

Quote:

Originally Posted by DOOPHUS

Are "Lookie Lou's" allowed?

! ! ! ! ! !

Of course!

Delma Lou · 02-24-2009, 03:53 PM

Our friends Ken and Shirley Gibbs would like to come.

Mike: they want the Black strut kit to eliminate the hood prop rod. They have a Yellow 2004

Delma Lou

ewest · 02-24-2009, 04:19 PM

I would like to get Mikey's mirrors installed but i have to be in Vegas for a wedding
maybe next time