I'm going to purchase this outfit soon and want to have a shop put it on for me on a hoist. Is there an issue if a 2004 SSR has a turbocharger on it? I know that may be a goofy question, but I just want to make sure. Is there a shop in Metro-Detroit that can install it? I have a place in Flint that has experience doing it and may go there, but if there is a closer place to Detroit....I would do it here.
Double checking ... Is it Turbocharger or Supercharger? That two different things.
If supercharger, no problem.
If turbocharger, guess it depends on where the turbo attach.
Double checking ... Is it Turbocharger or Supercharger? That two different things.
If supercharger, no problem.
If turbocharger, guess it depends on where the turbo attach.
It's a Supercharger.....I mis-wrote earlier. Thanks
It's a Supercharger.....I mis-wrote earlier. Thanks
No issues with the supercharger. Thanks!
__________________ http://www.leftcoast32.com
'07 TrailBlazer SS LSX390 "TVS2300" 18.5 psi
1015 HP and 936 TQ at 6400 RPM's Authorized MagnaCharger Dealer/Distributor
It is really simple to install, I did my own in the garage. But you will need a second pair of hands for the stiffener plate. Drilling the two holes are a little tricky but if I can do it, ANYONE COULD! Good luck on the installation.
Easy install! Easier on a lift but not difficult with jack stand either.
Here are some pictures.
Should have alignment checked after LC32 Cross Member install. Just to be safe.
Only cost $20 bucks for alignment check.
Dicktator
1. May have to drill front bracket for frame brace
2. Installing, that is Jeffanatic.
3. Front of Frame Brace.
4. LC32 Cross Brace, for the ultimate in handling.
5. LC32 Cross Brace, for the ultimate in handling.
My SSR: 04 Redline, 456 Gears, Diablo tune, Flowmaster 50, Eibachs, and lots of Mike in AZ's goodies.
Quote:
Originally Posted by RDen
I'm going to purchase this outfit soon and want to have a shop put it on for me on a hoist. Is there an issue if a 2004 SSR has a turbocharger on it? I know that may be a goofy question, but I just want to make sure. Is there a shop in Metro-Detroit that can install it? I have a place in Flint that has experience doing it and may go there, but if there is a closer place to Detroit....I would do it here.
Whats the name of the place in Flint? I lived in Flint area most of my life, maybe I know them and can tell you whether they are any good or not. Mike.
My SSR: 2005 Black 6spd: Flowmaster: Jwewmy tune and Thr bdy.; Mike's stiffener; LC32 crossmember.
I had mine put on last spring and the difference was immediate, and great. I've gotten used to by now, but I'll bet if I rode in an R without them-I'd know.
My local shop installed them, and I had the alignment checked as I also had new tires installed all around. Good timing!
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
