Anyone (2005SSR6speed, Mike in Az, Doug Allen, etc!) know a source for side pipes with some form of muffling built in?
Randy and I did some "extensive renovation" on "Red" today, had a FABULOUS day in terms of results, and I realized I have a perfect application for some form of side pipes with muffling, after taking the running boards off (details coming tomorrow or Monday . . .).
Each side pipe would be fed from one bank of an LS series engine, and some form of croosover / merge just before the side pipes.
It looks like the pipe diameter would need to be at least 2.5 inches, and preferably 3 inches.
This would create an aesthetic that until today we did not realize was a possibility, and would also eliminate the problem of getting 2.5 or 3 inch pipes over a rear axle that will be closer to the frame rails after the mono leaf springs are installed.
Those reading this posting who have not read my SLURP series: Red is a 1955 Chevy pickup, NOT an SSR, so don't say "I am interested too"!
Jim G
Linear Mode
