Power Window Problems

[Trouble]

Hi everyone just wondering if aneyone have had a problem with the window not droping when you open the door. I have to put the window down before opening and when I close the door I have to put it back up that 1'' any idea of what might be wrong. It worked fine the last time I drove it its been stored in a heated grage and when I checked on it today it dont work.

[RUN ROD RUN]

Have you tried indexing the windows lately? Follow the steps below and see in that helps.
1. Close the vehicle doors.
2. Activate the window switch in the up position until the window has reached the full up position and stalls and hold the switch for an additional 0.5 seconds.
3. Activate the window switch in the down position until the window has reached the full down position and stalls and hold the switch for an additional 0.5 seconds.

Lots more info about power windows at this link:
Window Data

[BlueStreak]

Originally Posted by RUN ROD RUN

Have you tried indexing the windows lately? Follow the steps below and see in that helps.
1. Close the vehicle doors.
2. Activate the window switch in the up position until the window has reached the full up position and stalls and hold the switch for an additional 0.5 seconds.
3. Activate the window switch in the down position until the window has reached the full down position and stalls and hold the switch for an additional 0.5 seconds.

Lots more info about power windows at this link:
Window Data

Do not want to step on toes but I think RRR means 5 sec in steps 2 & 3.

[RUN ROD RUN]

Originally Posted by BlueStreak

Do not want to step on toes but I think RRR means 5 sec in steps 2 & 3.

I copied it from an older post. Guess I get the blame.

[Trouble]

Originally Posted by RUN ROD RUN

I copied it from an older post. Guess I get the blame.

Thanks for the info I just got back from the shop and that did the trick the windows work again thanks.

[xs-cash]

yah, just re-index your windows jason.