Choice of disks. Help/

[Pania]

All Greetings!
Prompt exact characteristics of landing places for wheels ( bolts (6), distance between them and width of a start (offset??))
At somebody disks 20 " in front and 22 " behind cost. I wish to order to myself the Japanese disks. The question as behaves SSR on greater speeds with such disks (rubber I shall order Goodrich). Or it is better to leave the former sizes of wheels. And the second question what optimum width of back wheels for such 310Hp 22õ10 or 22õ11 (12)

Thanks

[mikepowell]

I believe what you need to know is the bolt pattern and offset of the wheels for our ssRs
can anyone help our over seas fanatic
I think the only problems with larger wheels are harsher ride and a greater chance of wheel or tire damage
good luck on your quest
p.s. manuer!

[mikepowell]

the bolt pattern is:
6 x 127mm (6x 5")
the front offset is:
35mm (5 3/4" backspace)
the rear offset is"
20mm (6 1/8" backspace)
I hope this helps

[vettegirl]

There was some more info about the wheels on this thread. We have ordered 20's & 22's for our SSR, they should be delivered in the next week or so - we can post pictures then if you like.

By the way, how hard was it to find an SSR in Russia? Do you see many there?



Hi all!

[Pania]

Greetings Vettegirl!!!
I was interested with your disks. Please send me a photo on pania2003@list.ru or in privat.

In Russia only 4 SSR (two - 5.3 and two 6 litres with the automatic device and mechanics) two silvery and two black. And in Moscow goes from them two my silvery and still black 5.3.
To buy it was not complex - has seen, has ordered - have driven. For money in Russia ALL is possible. A problem in service and tuning. All it is necessary to search through you and on IT for MANY THANKS!!!!!

But at us is people and I wish to order it manufacture a spoiler on SSR.

Look what disks I want here the reference (the name of disk Rowel or ES-01)

Pania welcome!!!!!

http://www.superstar-wheel.com/products/index.html