Pulsating brake light ?

Mr Accountant · 06-11-2008, 08:53 AM

KAH Tech or Web Electric ?

Which one is better? I know there is a $40 price difference.

Thank you

Dick Bellville · 06-11-2008, 09:39 AM

The "Blinking" light we are useing here in Florida is:

KAHTEC Blinking Smart Stop flashin third brake light

Light will blink rapidly 6 times and then stay on.

Part # 301-2003-01

Go to Blinking Smart Products from KAH Technologies

Cost $20 bucks.

We have at least a dozen is service.

RUN ROD RUN · 06-11-2008, 09:46 AM

I used the Web Electric unit. It so easy to put on.

Brake Lite

Dave Price · 06-11-2008, 10:20 AM

I used the Kahtec part. But I didn't use their connectors, didn't give a tight connection.
Dave

abadssr · 06-11-2008, 12:01 PM

I put the web electronic one on very very easy to do.gets the job done

yellow tub · 06-11-2008, 12:07 PM

Web Electric... fast and EASY!!!

Blue Thunder did mine in 10 minutes!!

Thanks again Jeff!!

Bruce

tub

Joe Schuhriemen · 06-11-2008, 01:01 PM

Web Electric is the one to get. A piece of cake to install(10 minutes) and works like a charm. It's a real good idea to install one so that they can see you better. it might save you from a rear ender.

yellow tub · 06-11-2008, 01:18 PM

Quote:

Originally Posted by Joe Schuhriemen

It's a real good idea to install one so that they can see you better. it might save you from a rear ender.

In addition to the brake light pulsator, I went so far as to have the turnsignal mirrors installed AND had them wired to be activated when I use the brake...

Just a thought...

Bruce

tub

SoonerRed · 06-11-2008, 01:39 PM

Quote:

Originally Posted by Dave Price

I used the Kahtec part. But I didn't use their connectors, didn't give a tight connection.
Dave

Cuz I couldn't figure out why the other one was twice the price.

turnheadz · 06-11-2008, 03:08 PM

Quote:

Originally Posted by Joe Schuhriemen

Web Electric is the one to get. A piece of cake to install(10 minutes) and works like a charm. It's a real good idea to install one so that they can see you better. it might save you from a rear ender.

I have the Web Elec. Plug and play from a C5 Vette. Can't get simpler than that.

Sandy

BlueStreak · 06-11-2008, 04:38 PM

I have webelectric and am happy but did know about any others at the time. Definetly simple to install. Turn sig mirrors are a bit more chalenging but I like haveing the brake lights on them as well.

If you do the mirrors do the fat mat as well, while the doors ar apart.

abadssr · 06-11-2008, 05:47 PM

Quote:

Originally Posted by yellow tub

In addition to the brake light pulsator, I went so far as to have the turnsignal mirrors installed AND had them wired to be activated when I use the brake...

Just a thought...

Bruce

tub

is it in the directions for turn signal only or do they have to have the brake lites go on too

crazyrtr53 · 06-11-2008, 05:51 PM

If you can do simple cut and wire together then Kahtec, you save money..

If you screw more things up when trying to install something then Web electric, you pay more for plug & play.

I installed Kahtec Third Brake Light, Mike in Az Signal Mirrors, and also Spider Lights (led lights) in my stop lights. Out here in Calif. the more lights the safer you are....

crazyrtr53 · 06-11-2008, 05:53 PM

Quote:

Originally Posted by abadssr

is it in the directions for turn signal only or do they have to have the brake lites go on too

It's your choice you can wire it how you like. Some wire so they come on when applying brakes or turn signals only, it's in the directions...

abadssr · 06-11-2008, 05:56 PM

Quote:

Originally Posted by crazyrtr53

It's your choice you can wire it how you like. Some wire so they come on when applying brakes or turn signals only, it's in the directions...

thanks tony hows that queen of yours

crazyrtr53 · 06-11-2008, 06:12 PM

Quote:

Originally Posted by abadssr

thanks tony hows that queen of yours

She's spotless, covered, pluged in, and waiting for her next big adventure out

artsmart · 06-11-2008, 06:13 PM

Quote:

Originally Posted by crazyrtr53

She's spotless, covered, pluged in, and waiting for her next big adventure out

does she have her new mods yet or is that going to be a surprise?

crazyrtr53 · 06-11-2008, 06:23 PM

Quote:

Originally Posted by artsmart

does she have her new mods yet or is that going to be a surprise?

The project is on the back shelf, literally or is that the top shelf of the garage...

The surprise will be what year it does get done....

onebadeagle · 06-11-2008, 11:50 PM

Does the third light have one or two bulbs in it?

yellow tub · 06-12-2008, 12:22 AM

Quote:

Originally Posted by onebadeagle

Does the third light have one or two bulbs in it?

It is not a light... it is an electrical pulsating unit that is a plug and play. It installs inline before the light itself.

Oooops.. you were asking about the bulbs... don't know, just know about the switch. sorry

Bruce

tub

MoodyBlue · 06-12-2008, 02:11 PM

These Circuits are fun to make if you are a hobbiest. There are just a few electronic componets stuffed on a small Bread board. You can pick up all the components at your local Radio Shack, and have fun soldering them on the Bread Board. " Circuit Board" It would be a fun project, and if you made more of them you could sell them or give them away to your Fanatic Friends.