Under Hood Pad

[bronco]

The insulation pad under hood is coming loose. What can I use to glue it back up. What will take the heat. Any advise would be appreciated.

bronco

[ssrtruck]

It's held up with plastic push in retainers. Are they all there. If SO, is the material comming apart? If this is the case, 3M #08090 super trim adhesive will work to glue it back togeather. I wouldn't use it to glue the pad to the hood though. If you need retainers, NAPA 665-1519 BK will work.

[Rte66SSR]

Originally Posted by ssrtruck

It's held up with plastic push in retainers. Are they all there. If SO, is the material comming apart? If this is the case, 3M #08090 super trim adhesive will work to glue it back togeather. I wouldn't use it to glue the pad to the hood though. If you need retainers, NAPA 665-1519 BK will work.

You can get the retainers at just about any hardware store--probably cheaper than NAPA--I just bought some a couple of months ago.

[Doug Allen]

Pep Boys - cheap.

[TrikeRider]

I used some heavy duty velcro Worked just fine

[XSELER8]

Originally Posted by Doug Allen

Pep Boys - cheap.

Ditto Pep Boys. I think they are 3 per pack

[bronco]

Thanks all.

bronco

[ssrtruck]

Originally Posted by Rte66SSR

You can get the retainers at just about any hardware store--probably cheaper than NAPA--I just bought some a couple of months ago.

665-1519 has 10 pieces for $4.99 If that's too much, your too cheap.

[Rte66SSR]

Originally Posted by ssrtruck

665-1519 has 10 pieces for $4.99 If that's too much, your too cheap.

There's an Evans Hardware down the street where you can just buy one if you want to--same price per item. Not cheap. Thrifty.