Suspension Section.

[NORCAL SS]

Hey guys wondering if you can put up a suspension section. Ive been working on the tbss suspension and trailblazers for over 3 years and done it all on these trucks and those. I worked with suicide door for custom pan hard bars and you can ask left coast 32 2006ssr6speed i definetly know these trucks suspensions back and forward.

after seeing a ball joint snap on one because of the ball joint angle id like to get as much info i can to you guys.


Tony.

[REBEL]

Post what you believe in the SSR Technical Discussion section.
Jim G. is a paying member that offered a lot of info with facts and reference to back it up.
He offered to have a running section and was turned down.
He had to just post his info where he could, and he was not selling stuff.

[NORCAL SS]

Originally Posted by REBEL

Post what you believe in the SSR Technical Discussion section.
Jim G. is a paying member that offered a lot of info with facts and reference to back it up.
He offered to have a running section and was turned down.
He had to just post his info where he could, and he was not selling stuff.

im not selling stuff either just pointing out a good kit.

So what if im not a paying member that doesnt have anything to do with helping guys out

[REBEL]

Bell drop kit, coil overs, lowering work just a few post of what you sell.

You should go back and erase your posts if you want to say your not selling

[NORCAL SS]

Originally Posted by REBEL

Bell drop kit, coil overs, lowering work just a few post of what you sell.

You should go back and erase your posts if you want to say your not selling

i just lower up here in norcal but havent seen one other ssr person from up here on this board.

Also suicide doors pan hard bar goes thru them, mike at djm goes thru them, summit kit goes thru them.

As for coilover kits how long ago was that post and the belltech ones i didnt even sell on here.

Its ok ill just keep on giving members the right info while you sit here and bash on me

[WOW_FCTR]

Originally Posted by NORCAL SS

Hey guys wondering if you can put up a suspension section. Ive been working on the tbss suspension and trailblazers for over 3 years and done it all on these trucks and those. I worked with suicide door for custom pan hard bars and you can ask left coast 32 2006ssr6speed i definetly know these trucks suspensions back and forward.

after seeing a ball joint snap on one because of the ball joint angle id like to get as much info i can to you guys.


Tony.

PM Marc NY or dascrow for any site questions. As neither may see this post.
Marc is only a moderator, but he is on here more often.

[Marc NY]

Originally Posted by WOW_FCTR

PM Marc NY or dascrow for any site questions. As neither may see this post.
Marc is only a moderator, but he is on here more often.

FYI: I am one of our site's Administrators and I also act as a Moderator too... all rolled into one.

BTW: I do get a few PMs from time to time that are sent to me about topics that John sees and I may not catch.

Thanks John...

[xs-cash]

norcal ss , thanx for posting the info . i also lowered my 04 with bell-tech & i will be keeping an eye on my front end. nathan