Chevy SSR Forum banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
51 Posts
Discussion Starter #1
Somehow or another when I ordered an*Anti-lock Brake Heat Shield from Simple Engineering in error I must have noted that I wanted two. I only need one. Here is how this heat shield is described on the Simple Engineering web site:

This is a shield that provides a thermal barrier between the left catalytic converter and the anti-lock brake unit. It's laser cut from a sheet of*stainless steel. An additional insulating heat barrier is applied to the side that faces the catalytic converter*The heat shield attaches to existing mount holes and does not require any drilling or cutting. All necessary hardware is included. This heat shield fits all years of SSR and all versions (including the SS) of Trailblazer/Envoy style platforms. Installation is approximately 5 minutes with only a 10mm socket and a 10mm box/open end wrench.

I will sell my extra one for $35 plus $12 for Priority shipping. Prefer PayPal but personal check also ok.
 

Attachments

1 - 3 of 3 Posts
Top