Chevy SSR Forum banner

1 - 11 of 11 Posts

·
Premium Member
Joined
·
5,290 Posts
Discussion Starter #1
Want to put small section over top of tailgate. Any recommendations and hints on installing.
IMG_20200604_162902096_HDR.jpg
 

·
Premium Member
2004 Slingshot Yellow
Joined
·
1,829 Posts
This is what I put on my stone guards after refinishing and replacing them.
Bought directly from Expel. It's thicker and better than 3M paint film and easier to install.
You can pick the width and length. It's not very difficult to install on a flat surface. On corners and curved areas you need a heat gun to fit it. I wouldn't attempt a large area though. That's for the professionals.
 

·
Registered
Joined
·
2,618 Posts
This is what I put on my stone guards after refinishing and replacing them.
Bought directly from Expel. It's thicker and better than 3M paint film and easier to install.
You can pick the width and length. It's not very difficult to install on a flat surface. On corners and curved areas you need a heat gun to fit it. I wouldn't attempt a large area though. That's for the professionals.
Hoo Doggers! 1ft x 5ft for $55!! That's pricey stuff
 
1 - 11 of 11 Posts
Top