Chevy SSR Forum banner
1 - 1 of 1 Posts

·
Retired GM Program Manager/ Chief SSR Engineer
Joined
·
549 Posts
I have operated the roof manually. It takes a very high force to release the tonneau by pulling on the cables. You are pushing fluid through the shut down hydraulic system. A strong, long pull is required. Everything moves slowly and you need a steel handle inserted into the wire loops. The roof tool has a small groove to capture the wire for this purpose. Hopefully no one has to actually do this.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top