Chevy SSR Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 4 of 4 Posts

·
Enjoying life as it comes
Joined
·
5,210 Posts
Setting

On the side of the drivers seat are two buttons numbered 1 and 2. Adjust the seat position where driver one needs it and then depress the 1 button until you here a chime in the vehicle. Then repeat the process for the driver 2 seat position and depress the 2 button until you here a chime. Then try each of the key fobs and your in business.
 

·
Registered
Joined
·
1,502 Posts
Driver 1 & 2 settings are associated with the respective keyfobs. Which ever keyfob is used to unlock the doors, determines which settings are selected or set.

Items that are recalled based on 1 or 2 include:

Radio presets. It has two complete sets, but there is no way to choose which, to use or change, except that it goes into mode 1 or 2 when the doors are unlocked.

Seat presets. Modify the settings for 1 or 2 at any time using the relevant buttons of the seat.

I don't know about the outside mirrors.

There may be more, I don't know.
 

·
Registered
Joined
·
371 Posts
Beth....in order to adjust and save the settings for each driver, you must first use that key fob to unlock your SSR. The drivers information center will display which driver has unlocked the car. Your key fobs are also numbered on the back. The drivers seat, radio stations, automatic door lock and unlock, light delays on exit, locking confirmation on exit, etc. will be saved for each driver. Settings are viewed in the dic by using the buttons on the sterring wheel. Good Luck!

L2B
 
1 - 4 of 4 Posts
Top