Chevy SSR Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 20 of 33 Posts

·
Premium Member
Joined
·
802 Posts


Suggestions, comments and general feedback about The Heritage Center are welcome and encouraged.

Please post them in this thread. Use the Post Reply button above, to the left.
>
 

·
Premium Member
Joined
·
9,451 Posts
Awesome job on the Heritage Center, Jay.

Congratulations, and thank you for having the drive and the vision to see it through.
 

·
Boop Op A Doop
Joined
·
30,422 Posts
Awesome job on the Heritage Center, Jay.

Congratulations, and thank you for having the drive and the vision to see it through.
I couldn't agree more :thumbs reviewing the information this morning :)

The layout , information, pictures and facts are fabulous......a job well done indeed. I am looking forward to adding more factual information to it in the days to come. What a wonderful addition to this site!

Well done Jay..........Well DONE!!!
 

·
Super Moderator
Joined
·
14,098 Posts
Awesome job on the Heritage Center, Jay.

Congratulations, and thank you for having the drive and the vision to see it through.
Thanks Jay!
Looking forward to seeing it go live and appreciate all the work you have done in the setup.
I just noticed by the date of the Thread that we must have started yakking about this 3 or 4 months ago!:eek
I see Flassh has his act together!
I'm getting stuff ready!!
:)
 

·
Premium Member
Joined
·
9,451 Posts
Thanks Jay!
Looking forward to seeing it go live and appreciate all the work you have done in the setup.
I just noticed by the date of the Thread that we must have started yakking about this 3 or 4 months ago!:eek
I see Flassh has his act together!
I'm getting stuff ready!!
:)
I didn't do much except provide some data. Jay did all the work.
 

·
One of the SoCal Nuts
ROTM 1/2016 - 2006 PacBlues 376 & 29
Joined
·
28,976 Posts
Thanks for the time and effort involved in bringing this section to the site. I have one request related to postings in The Heritage Center:

Can they be formatted as a standard screen size instead of the wide screen. I have looked at the sticky threads in all Forums and some are fine but others are wide screen and become a real problem to read, involving shifting the screen from left to right for each line read. In the distant future I am sure all computers will have wide screens, but for now I am sure that there are many of us who do not. If I shrink the page to fit my screen then the type becomes too small to read.

Thanks for at least listening and looking at this issue.
 

·
Premium Member
Joined
·
802 Posts
Discussion Starter · #8 ·
Thanks for the time and effort involved in bringing this section to the site. I have one request related to postings in The Heritage Center:

Can they be formatted as a standard screen size instead of the wide screen. I have looked at the sticky threads in all Forums and some are fine but others are wide screen and become a real problem to read, involving shifting the screen from left to right for each line read. In the distant future I am sure all computers will have wide screens, but for now I am sure that there are many of us who do not. If I shrink the page to fit my screen then the type becomes too small to read.

Thanks for at least listening and looking at this issue.
Bluestreak, please provide a couple examples of the threads that require the scrolling for you and we'll take a look. We tried to be careful about this in the set-up but must have missed a few. My bet is those that are problematic have pictures in them that extend across the page -- two to three pictures centered some times causes problems depending on the resolution setting you're using on your computer. Thanks for flagging it!
 

·
One of the SoCal Nuts
ROTM 1/2016 - 2006 PacBlues 376 & 29
Joined
·
28,976 Posts
Bluestreak, please provide a couple examples of the threads that require the scrolling for you and we'll take a look. We tried to be careful about this in the set-up but must have missed a few. My bet is those that are problematic have pictures in them that extend across the page -- two to three pictures centered some times causes problems depending on the resolution setting you're using on your computer. Thanks for flagging it!
These two are the real offenders. There are others on the production year Forums but they are such that if centered you only lose the left column infomation like who posted and such.

http://www.ssrfanatic.com/forum/f77/concept-reality-42944/#post774465

http://www.ssrfanatic.com/forum/f80/signature-series-overview-42918/#post774174


thanks for the quick attention.
 

·
OP
Joined
·
8,249 Posts
These two are the real offenders. There are others on the production year Forums but they are such that if centered you only lose the left column infomation like who posted and such.

http://www.ssrfanatic.com/forum/f77/concept-reality-42944/#post774465

http://www.ssrfanatic.com/forum/f80/signature-series-overview-42918/#post774174


thanks for the quick attention.
not on my screen dwight...I am viewing on a laptop 15.4". No side scrolling needed and I can read all the letters without my readers.

Check your screen resolution and increase it to eliminate the horizontal scroll.
 
  • Like
Reactions: Engineer

·
Super Moderator
Joined
·
14,098 Posts
I didn't do much except provide some data. Jay did all the work.
I misinterpreted a note from Jay thinking this was all going live tomorrow.:lol I'm a day late (and a dollar short) per usual. I was referring to all the threads I saw Jay posting over the last few days for each Signature which I assume will detail the information you have been amassing over the past number of years.
Wow, lot of stuff to go through Jay. Looking very impressive.:)
 

·
Premium Member
Joined
·
737 Posts
Signature 7 says "This is great!" and me too. Looking forward to reading more on all the special SSR's out there and adding all the goodies that I have on #7.

Thanks to all that have worked on this.

Mike
 

·
Premium Member
Joined
·
2,960 Posts
I guess we now know why Jay has been so quiet the last few months.
This section looks like it took a lot of time and effort to construct.
You did a great job Jay.:thumbs

I wonder what section I will be posting in?:glol
 

·
Premium Member
Joined
·
9,451 Posts
I guess we now know why Jay has been so quiet the last few months.
This section looks like it took a lot of time and effort to construct.
You did a great job Jay.:thumbs

I wonder what section I will be posting in?:glol
Two tones?:)

Actually, Charlie, I think you'll have a really nice spot when the Pace Truck section gets done.:thumbs
 

·
Premium Member
Joined
·
161 Posts
Thanks!

PaceGuy - Thanks for taking the time & effort to educate those of us who want details about design, production, etc. Information provided is invaluable to all SSR Fanatics. Great Job!:black:
 

·
Registered
Joined
·
599 Posts
concept/prototype

The concept production intent vehicle was built, Does anyone have knowledge of the companies involved? If anyone is interested, I will try to get some of the information!
Doug

I believe one fo those companies went out of business in the last 2 years due to the economic climate! Auburn Engineering played a large part in the Fascia development!
 

·
Registered
Joined
·
66 Posts
Hi Papawalker I am jimkat.I have a 04smokin Asphalt final assembly lansing,Mich.How do i find out when she was born?Thanks JIMKAT
 
1 - 20 of 33 Posts
Top