[bubbajo]

Dale and Sandy are planning on being there. We're good with bar b q and or mud bugs. Ole blue needs front shocks. I have front Bilstein's shocks and moog mounts from SE. If time allows I would also like to replace window track felt. I have the Velcro. Sandy and I are willing to help with whatever needs to be done, just need some guidance.

Dale

 

[bubbajo]

I put you down for 1 BBQ and 1 mudbug. If it is really 2 BBQ or 2 mudbug, please let us know. Generally there is enough for “a little stretching to the other side fo the table”, but we’d like to make sure we are not way too short on something or way too much.

Sorry, put us down for 1 and 1.

 

[bubbajo]

If only Lester had some muffler bearings, I'd load up my Corsa exhaust to install at the techie session.....

No worries, I just found some NOS bearings. .40 over should be standard size for our R's

 

[bubbajo]

I need to make a slight change on what I would like to get done on Tech day. Scratch the front shocks, I had an opportunity to use a lift and a friend to help so that's done.
I still would like to felt the window channels so they track better and don't scratch the tint. And I have sound deadener for the doors since the panels are coming off. I have a Corvette servo I would like to install, time permitting.
thanks,
Dale (bubbajo)

 

[bubbajo]

Do you have the felt? If not I have some and could make you a deal....

I have 1/2" velcro. I think l read to use either that or mole skin. If what you have is better I'll take you up on it.

 

[bubbajo]

Let me measure and see if I have enough moleskin, as yours should take 4 strips. I’ll send you a conversation tomorrow and let you know.

Will this work https://www.amazon.com/dp/B075MFRLG...olid=3D8UTHQ5BONY9&psc=1&ref_=lv_ov_lig_dp_it

 

[bubbajo]

IDK. Mine is black. Just got back from working out. Will check what I’ve got and let you know.

black is probably better.