Chevy SSR Forum banner
1 - 20 of 44 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter · #1 · (Edited)
Cargo Trailer and Hitch Modification

I am looking for an enclosed cargo trailer to use behind the SSR fo hauling two Harleys. I know of the Ironhorse Eagle Sport Carrier, but was wondering what other Harley rider were using? I would be interested in others comments. Thanks ;)
 

·
Premium Member
Joined
·
171 Posts
03DUCE said:
I am looking for an enclosed cargo trailer to use behind the SSR fo hauling two Harleys. I know of the Ironhorse Eagle Sport Carrier, but was wondering what other Harley rider were using? I would be interested in others comments. Thanks ;)
I've got an 8'X12' enclosed tandem axle HAULMARK, that I used for my two bikes, and I'm looking to sell it to make room in my garage. PM me if interested.
Don
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #3 ·
Thanks HARDOC, I also have a S&H single axle 6x10 v nose two bike enclosed trailer that I was pulling with my C3 that is for sale. A little to heavy for the SSR. Thanks for the responce.
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #5 ·
I have located another cago trailer mfg. in Mt. Gilead, Ohio, Fiber Core Sport TRLS @www.sporttrls.com. From the internet it look to be a nice trailer with good features. They do not have any dealers close and I was wondering if any one has seen this trailer and could provide an opion about it? Thanks for your help.
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #8 ·
Harley Hauler And Hitch Modification

Modifications to the trailer hitch have been made to lower the hitch 5 inches to provide a level platform for the Fiberglass Motorcycle Trailer. The modification will limit the SSR tongue weight capacity about 20%. The motorcycle Trailer is light (1200#) and the tongue weight is only (60#) when empty. With the motorcycles loaded over the center of the trailer axel there is very little increase in the tongue weight. The trailer pulls great and the aerodynamics work quite well.
 

Attachments

G

·
okie

03Duece,
what part of oklahoma are you located? I'm just north of Tulsa in Owasso. I have seen a few yeller ones running aroun here. I know 1 from Skiatook area.
BobA :thumbs :flag :seeya
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #10 ·
Hi Bob A,

I am located in Enid, OK. Have not been in Tulsa with the SSR, but worked for the Williams Co's a number of years ago. I do get to Tulsa once and a while and will look for you on the road. The best until.
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #13 ·
Ssr Trailer Hitch Modification

The SSR Trailer Hitch Modification was fabricated by a local welding shop. I can make arrangements for building one for anyone who migt be interested. The cost of the Hitch with mounting bolt ready to paint is $80.00 plus packing and shipping by UPS. You can e-mail me at ([email protected]) to work out the details.
Thanks to JimGnitecki inquire he is the "First Buyer".
 

Attachments

G

·
03DUCE

I am also interested as I trailer an ATV to the shop on occasion.

Question, does the fabracation have a tendency to rotate on the bolt & nut or is there a lip to hold it in line, I can't tell in the pic.

Thanks
 

·
Registered
Joined
·
84 Posts
Discussion Starter · #16 ·
I don't plan to paint it yellow by may repaint it to a semigloss flat black to match the trailer hitch.

To keep it from turning there is a U shape collar that the SSr hitch fit in. I works great and finishes off the modification.
 
1 - 20 of 44 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top