Chevy SSR Forum banner

1 - 4 of 4 Posts

·
Perfectionist
Joined
·
526 Posts
Discussion Starter #1
I have been working on the boards. I removed the rubber covers, and am going to leave them off. Will paint them all red. Also, sanded the seam out of the side. Will paint engine cover at same time. Wet primer!
 

Attachments

·
Premium Member
Joined
·
6,149 Posts
I have been working on the boards. I removed the rubber covers, and am going to leave them off. Will paint them all red. Also, sanded the seam out of the side. Will paint engine cover at same time. Wet primer!
Lookin Good. Don't get any paint on you 4 legged friend.
 

·
Premium Member
Joined
·
9,359 Posts
Wondering why the insert was masked off and put back in place on the cover.

If it was left off the entire cover could have been painted.:surprise:
 

·
Perfectionist
Joined
·
526 Posts
Discussion Starter #4
Wondering why the insert was masked off and put back in place on the cover.

If it was left off the entire cover could have been painted.:surprise:
Look close! The insert was removed (don't stick up) and the area beneath it was masked off. At 105.00 for a half pint of red no need to waste any painting underneath the insert.:laugh:
 
1 - 4 of 4 Posts
Top