Chevy SSR Forum banner

1 - 20 of 28 Posts

·
Premium Member
Joined
·
65 Posts
Discussion Starter #1 (Edited)
Already posted this request in the "Parting wrecked SSR thread.
Trying to replace the missing parts from my 04....
Looking for the following:

Driver Seat Module

Windscreen (behind seats)

Tailgate carpet

Tonneau cover carpet

Windshield squirters (attaches to wiper blades) OR 06 Wiper Arms.... (Thanks for the info RG)

Integrated Running Boards - Satin RPO BVE Preferred to be semi-local to the pacific northwest due to shipping costs.

Factory Hitch (BOUGHT! Thanks! JB9281)
Bed tie down rails upper and lower (BOUGHT! Thanks! SNOMUNCHER)
Door Speakers (BOUGHT! Thanks! oldxr)
Glove box door (BOUGHT! Thanks! byers)
Torx head screws/bolts that hold the tailgate inside cover on (Different Bolts Used)

If any anyone has these items available please let me know Forum, Call, or Text. Pristine condition is not needed. Serviceable Driver quality is what I am looking for.. This is a shop truck... BUT it drives me crazy not having the items listed in the RPO list........
Thanks!
Cruz
Cruzers Automotive
360-491-6644
 

·
Premium Member
'06 FPR Smokin Asphalt; '04 Ulta Violet
Joined
·
4,223 Posts
Sooooo like RG said----call the guy, Mike, in the thread you tried posting in!!! People selling parts might not have time to call people WANTING parts. just saying------EDIT---JUST SAW YOU ALREADY DID THAT. GOOD LUCK

Nick
 

·
Registered
Joined
·
604 Posts
while only 5 parts on fleabay right now Cleveland pick a part always has lots of SSR parts, lots. I would contact them and see if you can put a package together. Link below is just to get you to ebay, you can search their ssr items and contact from there.


https://www.ebay.com/sch/Car-Truck-Parts/6030/m.html?item=252877676449&rmvSB=true&_ssn=clevelandpap&mvsub=1&_mcatda=true&selfil=1,2,3,4,5&selvel=2005~Chevrolet~SSR~Base%20Convertible%202-Door~6.0L%205967CC%20364Cu.%20In.%20V8%20GAS%20OHV%20Naturally%20Aspirated&MYear=2005&MMake=Chevrolet&MModel=SSR&vToken1=Base&vToken2=6.0L
 

·
Registered
Joined
·
1,038 Posts
Welcome aboard might take a bit for guys to respond back to you about what you are looking for but don't give up hope, keep updating your list as you go along some people only check the forum 1-2x a month. I am sure you will find what your looking for.
 

·
Premium Member
Joined
·
65 Posts
Discussion Starter #10
The bed rails are the tie down rails... from pictures I have found on the internet there should be ones on the upper sides I believe a cross rail attaches to them and 2 on the outer edges of the floor either side of the wood strips. I am assuming the bed carpet is held in with push pins and the torque headed bolts. If any one has pictures of the areas mentioned it would be a great help trying to locate the missing parts. the bed was stripped when I acquired the shop truck. the Tonneau has been replaced and I wonder if the bed light may have caused a small fire and the reason the bed was bare.....

OLDXLR if you happen to have the missing bolts/screws let me know! (I am kind of a stickler when it comes to using factory hardware)
 

·
Daily Driver
Joined
·
8,935 Posts
I think the wood strips are attached to, and cover, the bed rails.
 

·
Premium Member
Joined
·
1,757 Posts
Cruzinfive.........what do you need? Also, I have all the pieces that held in the Rubbermaid bed liner so I think I may have rails. I do have NOS bed strips in copper oak. Full roof and liners, NOS front bumper, hinges, all roof hydraulic parts, some interior trim, taillights, radio, speakers, front and rear chrome center caps and on and on..........
 

·
Premium Member
Joined
·
65 Posts
Discussion Starter #14
I am not able to post or reply to PM's yet... not enough posts.... (working on it)

Oldxr... Do you have a glove box door available? Also need the screws that hold the inside access cover for the tail gate. I believe the coin and cup holders are different between the 03-04 and the 05-06's so I don't think they would work. I do have water intrusion into the left rear tail lamp. if you happen to have the pair of lamp assy.

SNOMUNCHER
... I am intested in the bed rails. I cannot reply to your PM (see above) you can call or text me @ 360789-1751
 

·
Premium Member
'06 FPR Smokin Asphalt; '04 Ulta Violet
Joined
·
4,223 Posts
I am not able to post or reply to PM's yet... not enough posts.... (working on it)
Just type--- "cool", "nice job", "looks good", on a lot of threats will get you there!!

Nick
 

·
Premium Member
2004 Slingshot Yellow
Joined
·
1,902 Posts

·
Premium Member
Joined
·
65 Posts
Discussion Starter #18
Thanks for checking oldxr.......

Texasbaehr..... I have looked at Cleveland Power and Pacific Motors. both are on ebay. Pacific is where I found the base carpet for the bed. Both are very proud of the parts they sell. and I understand the supply and demand concept. (been in the automotive industry for over 35 years repairing and rebuilding hotrods.) Its just good practice to try and find used factory parts before repops.. And generally get better service from private sellers than companies selling used parts. They are on my call list and thank you very much for the lead!
 

·
Premium Member
'06 FPR Smokin Asphalt; '04 Ulta Violet
Joined
·
4,223 Posts
Thanks for checking oldxr.......

Texasbaehr..... I have looked at Cleveland Power and Pacific Motors. both are on ebay. Pacific is where I found the base carpet for the bed. Both are very proud of the parts they sell. and I understand the supply and demand concept. (been in the automotive industry for over 35 years repairing and rebuilding hotrods.) Its just good practice to try and find used factory parts before repops.. And generally get better service from private sellers than companies selling used parts. They are on my call list and thank you very much for the lead!
My thought is Call Cleveland Power and talk to Tim Mulcahy and tell him you are a Fanatic Member. They can't list everything they have on E-bay, plus he can make a note of what you want and get back to you later

Nick
 
1 - 20 of 28 Posts
Top