Chevy SSR Forum banner
1 - 1 of 1 Posts

·
Supporting SSR Hobbyist
Joined
·
10,621 Posts
Have a close look at the wires that transition across the tonneau cover hinge on the passenger side. There are two clamps that hold the hoses and wiring onto the hinge. The three wires that are in that small bundle are from the flipper panel hydraulic actuator hall effect sensor. I have seen those wires compromised by the edge of the forward metal clip, right where the wires bend.

You may also have a gremlin in the electrical connector that is farther down that same bundle in the roof storage compartment. It carries the same three wires through to the computer system.

Regards, brother.

Mike
 
1 - 1 of 1 Posts
Top