Chevy SSR Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
25 Posts
Discussion Starter · #1 ·
For those offering insight & problem solving, here is an update. Got inside the actuator box. I checked the linkage; everything looked OK. I tripped the micro-switch & the actuator worked but not consistently. So removed the actuator, checked it with a 12 volt, worked EVERY single time. Next, I checked for voltage with the wiring to the actuator. I got 12 volts. Put the actuator back into place, checked but did not get the 12 volts.
Are there other micro-switches I'm not familiar with? Or am I missing something?
I know my fellow SSRFanatics are preparing for this weekend, wish I could join you. Any feedback is appreciated.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top